How much does a plumber or pipefitter make?

The typical plumber or pipefitter (BLS category: Plumbers, Pipefitters, and Steamfitters) in the United States earns $63,800 a year, or $30.67 an hour. Half earn more and half earn less.

$63,800Median pay a year
$30.67Median pay an hour
465,840Workers nationwide

BLS data, May 2025. Pay is before taxes. These figures are for the job across all employers, not for one company.

BLS combines plumbers, pipefitters, and steamfitters into one category. It does not publish separate pay figures for each.

Key facts

  • Highest-paying state: District of Columbia, with a median of $101,020 a year.
  • Lowest-paying state: Arkansas, with a median of $48,660 a year.
  • The median in District of Columbia is $52,360 (108%) higher than in Arkansas.
  • The top 10% of workers earn more than $108,420 a year, which is $44,620 (70%) above the median.
  • National median pay ranks 343rd of the 748 jobs in the BLS data we track with a published yearly median (1st is the highest paid).

Worked out from BLS figures for May 2025. States and jobs with no published median are not counted.

What is the pay range for a plumber or pipefitter?

Most workers in this job earn between $44,150 and $108,420 a year.

  • 10th percentile$44,150
  • 25th percentile$50,190
  • Median (50th)$63,800
  • 75th percentile$85,110
  • 90th percentile$108,420

The 10th percentile means 10% of workers earn less than that figure. The median is the middle.

How much does a plumber or pipefitter make in each state?

BLS published a median for 50 states and the District of Columbia. The table starts with the highest pay.

StateMedian a yearMedian an hourWorkers
District of Columbia$101,020$48.571,010
Illinois$99,950$48.0516,750
Oregon$97,050$46.665,370
Minnesota$94,410$45.3910,720
Alaska$93,920$45.151,200
Massachusetts$93,880$45.1413,460
Wisconsin$81,210$39.0410,210
Washington$81,030$38.9612,470
Michigan$80,190$38.5614,120
Montana$79,960$38.441,860
New Jersey$78,240$37.618,750
Hawaii$78,060$37.532,500
New York$77,490$37.2623,210
Connecticut$77,280$37.165,410
Rhode Island$76,470$36.771,820
Indiana$76,320$36.6911,280
California$72,830$35.0147,660
Pennsylvania$68,080$32.7313,620
New Hampshire$66,810$32.121,950
Missouri$66,790$32.118,310
Maryland$65,400$31.4411,420
Kansas$65,220$31.364,590
Delaware$64,720$31.111,590
Kentucky$64,160$30.846,360
Maine$64,000$30.772,710
Iowa$63,890$30.725,730
Louisiana$63,680$30.628,360
North Dakota$63,560$30.561,620
Ohio$63,330$30.4516,390
Colorado$63,240$30.4010,080
Wyoming$62,410$30.011,140
Vermont$62,170$29.89980
Arizona$62,070$29.8411,810
Utah$61,900$29.767,030
Nevada$61,610$29.625,370
New Mexico$61,440$29.542,830
Nebraska$60,970$29.314,110
Virginia$60,470$29.0713,780
Texas$59,840$28.7744,090
Alabama$58,670$28.216,950
Tennessee$58,600$28.179,270
Oklahoma$57,970$27.876,050
Georgia$57,200$27.508,930
North Carolina$57,080$27.4414,510
West Virginia$56,980$27.391,830
Mississippi$55,480$26.673,360
South Carolina$53,940$25.935,770
Florida$52,910$25.4429,260
Idaho$52,380$25.183,090
South Dakota$51,620$24.821,760
Arkansas$48,660$23.393,370

"Not published" means BLS did not release that figure. States with no published median are not listed.

How to become a plumber or pipefitter

43% of workers surveyed say this level of education is required: Post-Secondary Certificate.

How long does it take to become a plumber or pipefitter?

Employees in these occupations usually need one or two years of training involving both on-the-job experience and informal training with experienced workers. A recognized apprenticeship program may be associated with these occupations.

Most occupations in this zone require training in vocational schools, related on-the-job experience, or an associate's degree.

Licensing rules vary by state. Check your state's requirements.

What does a plumber or pipefitter do?

Assemble, install, alter, and repair pipelines or pipe systems that carry water, steam, air, or other liquids or gases. May install heating and cooling equipment and mechanical control systems. Includes sprinkler fitters.

  • Shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches.
  • Install underground storm, sanitary, or water piping systems, extending piping as needed to connect fixtures and plumbing.
  • Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, or soldering, brazing, or welding equipment.
  • Locate and mark the position of pipe installations, connections, passage holes, or fixtures in structures, using measuring instruments such as rulers or levels.
  • Cut, thread, or hammer pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders.
  • Lay out full scale drawings of pipe systems, supports, or related equipment, according to blueprints.

Sources

  • Pay and worker counts: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025. The BLS category is "Plumbers, Pipefitters, and Steamfitters."
  • Job description, tasks, education, and related jobs: the O*NET database.

How these figures are collected and what they leave out is on the methodology page.

This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA. HowsThePay has modified all or some of this information. USDOL/ETA has not approved, endorsed, or tested these modifications.

Page last updated .